Taco Smart Plug Instant Hot Water Control

• Instant Hot Water Control lets you upgrade any existing hot water recirculation pump with a power cord to “Smart” operation. Simply connect the SmartPlug ^®
• Instant Hot Water Control to any 110V power outlet then plug the circulator power cord into the SmartPlug.
• Using a sensor that mounts to the hot water supply pipe.
• The SmartPlug  will record the daily hot water usage pattern in a home and adjust the circulator run time automatically.
• Hot water will always be available when needed.
• No Programming, Timers or Aquastats Required • Sensor Included •

• When set to “Smart” mode, the SmartPlug monitors and records the home’s hot water usage pattern over a 7 day period.
• The SmartPlug will use the preceding week’s usage pattern to automatically cycle the circulator ON, so hot water is always available when it’s needed.
• The recording and repeating process is continuous, week after week.

• When set to “Pulse” mode, the SmartPlug will continously cycle the circulator ON for 5 minutes, then OFF for 10 minutes to maintain hot water at all fixtures.

• After 36 hours of no hot water usage, the SmartPlug will automatically turn the pump OFF and remain off until hot water usage is dectected.

• While in vacation mode the SmartPlug will cycle the pump for 10 seconds every 7 days to prevent any corrosion or scale build up.

Performance Data

• Input: 120VAC, 50/60HZ, single phase, 6A
  Output: 120VAC, 50/60HZ, Single phase, 1/2 hp (limited to 6 FLA, 36LRA)
  Sensor: NTC Thermistor, 10K ohm @ 77°F, B= 3392
  Fuse: 125V, 6A, Medium Acting 5×20 mm glass, Littelfuse® p/n 0233006 mxp
  Ambient Operating Temp.: 50-104°F (10-40°C)